피드백을 통해 제안을 제출하거나 온라인 고객 서비스에 문의할 수 있습니다. 신속하게 개선하겠습니다.:
지원
확인
??
지원되는 타사 쿠키 없음
귀하의 브라우저는 타사 쿠키 설정을 허용하지 않습니다. 브라우저 설정에서 활성화하거나 아래 버튼을 클릭하십시오.
새 탭에서 페이지 내용을 열려면 여기를 클릭하십시오.
열려 있는 페이지가 처음에 작동하지 않는 경우 페이지를 다시 로드해 보십시오.
파트커뮤니티가 작동하려면 브라우저에서 쿠키를 활성화하십시오.
CAD모델 선택
{thermokon/room_climate_control/room_sensors/climate_air_quality/ft_rdf18_plus_asmtab.prj},{NB=659031 FT-RDF18+ VV (300)},{ARTNR=659031},{EL=0},{IDPIM3=5304},{BEZ=FT-RDF18+ VV},{GGEO=x},{GEOV=x},{REF3D=FT-RDF18+ USE S},{BILD=ft_rdf18_plus.png},{INFOWWW=link zur Website},{MESSG= Temperatur, Feuchte},{AT= Deckeneinbaufühler},{BF=0},{BE=0},{KONFIG= Jumper},{S=---},{AGSPA= 2x 0..10 V, einstellbar über Jumper, min. Last 5 kΩ},{AGST=---},{AGSK=---},{EG=0},{NTECH=---},{FTECH=0},{DUT=---},{TEB=-35 - +70},{GKT= ±0,3 K (typ. bei 21 °C), im Standardmessbereich, Potentiometer zur Offset-Einstellung},{TEB1=---},{LOD=300}
기술적 기준에 따라 원하는 제품을 선택하십시오. 선택할 수 있는 속성은 테이블 아이콘으로 표시됩니다. 선택은 테이블의 아이콘이나 값에 따라 재설정 됩니다.
HELP_VARIABLE
Naming
FT-RDF18+ VV
FT-RDF18+ VV
Article Number
659031
659031
Level of Detail
300
200
300
200
Picture
link to website
link to website
Measured values
temperature, humidity
Application/type
Ceiling flush mount sensor
Configuration
jumper
jumper
Output voltage
2x 0..10 V, adjustable via jumper, min. load 5 kΩ
2x 0..10 V, adjustable via jumper, min. load 5 kΩ
Output current
---
---
Network technology
---
---
Data transmission
---
---
Operating range temperature
-35 - +70
Accuracy temperature
±0,3 K (typ. at 21 °C), within default measuring range, potentiometer for offset adjustment
±0,3 K (typ. at 21 °C), within default measuring range, potentiometer for offset adjustment
Output signal temperature
scaling analogue output, 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C, adjustable at the transducer
scaling analogue output, 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C, adjustable at the transducer
Operating range humidity
max. 85% rH short term condensation
Measuring range humidity
0..100% rH non-condensing, 0..85 KJ/kg enthalpy, 0..50 | 0..80 g/m³ absolute humidity, 0..+50 | -20..+80 °C dew point, adjustable at the transducer
0..100% rH non-condensing, 0..85 KJ/kg enthalpy, 0..50 | 0..80 g/m³ absolute humidity, 0..+50 | -20..+80 °C dew point, adjustable at the transducer
Accuracy humidity
±2% between 10..90% rH (typ. at 21 °C), potentiometer for offset adjustment
±2% between 10..90% rH (typ. at 21 °C), potentiometer for offset adjustment
Power supply
15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV
15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV
Power consumption
typ. 0,4 W (24 V =), 0,8 VA (24 V ~)
typ. 0,4 W (24 V =), 0,8 VA (24 V ~)
Material in touch with media
Sensor head, Ø=30 mm, ABS, white
Enclosure
USE-S, impact- and shock-resistant enclosure with quick-release cover, PC
USE-S, impact- and shock-resistant enclosure with quick-release cover, PC
Colour
pure white
Protection IP
IP30, enclosure IP65, according to EN 60529
Connection
removable cable entry flextherm M20 for wire Ø=4,5..9 mm, removable plug-in terminal, max. 2,5 mm²
removable cable entry flextherm M20 for wire Ø=4,5..9 mm, removable plug-in terminal, max. 2,5 mm²
Connection cable
flat ribbon cable, for mounting 15 mm from the sensor head, separable by means of RJ12 socket and plug, black
length connection wire
3,15
Mounting
facet mounting
Packaging
128 x 100 x 65
128 x 100 x 65
Delivery content
incl. mounting base enclosure USE-S pure white, incl. mounting set (screws and accessories)
incl. mounting base enclosure USE-S pure white, incl. mounting set (screws and accessories)
미리보기 - 생성
CAD
PDF
3D
2D