您可通過問題反饋或聯繫在線客服提交您的建議,我們將盡快完善:
Support
確定
??
不支持第三方 Cookie
您的瀏覽器不允許設置第三方 cookie。Please enable them in your browsers settings or click the button below.
請單擊此處在新選項卡中打開頁面內容。
If the opened page does not work initially, try reloading the page.
Please enable cookies in your browser for PARTcommunity to work
CAD模型選擇
{thermokon/duct_sensors/climate_air_quality/lk_plus.prj},{NB=662345 LK+ CO2 Temp RS485 Modbus (300)},{ARTNR=662345},{EL=180},{IDPIM3=5135},{BEZ=LK+ CO2 Temp RS485 Modbus},{GGEO=},{GEOV=},{REF3D=LK+ USE M},{BILD=lk_plus.png},{INFOWWW=link zur Website},{MESSG= Temperatur, CO2},{AT= Kanalfühler},{BF=0},{BE=0},{KONFIG= Thermokon App, uConfig, BUS, Jumper, DIP-Schalter},{S= NDIR (nicht dispersiv, infrarot)},{AGSPA= 2x 0..10 V oder 0..5 V, einstellbar über Jumper, live-zero-Konfiguration über App oder uConfig, min. Last 10 kΩ},{AGST=---},{AGSK=---},{EG=0},{NTECH= RS485 Modbus},{FTECH=0},{DUT=RS485 Modbus RTU, halbduplex, Baudrate 9.600, 19.200, 38.400 oder 57.600, Parität: keine (2 Stoppbits), gerade oder ungerade (1 Stoppbit)},{LOD=300}
請根據技術需求選擇所需產品. 可選屬性在表格中高亮顯示. 選擇可以通過點擊表格或數值來重置.
HELP_VARIABLE
Naming
LK+ CO2 Temp RS485 Modbus
LK+ CO2 Temp RS485 Modbus
Article Number
662345
662345
Level of Detail
300
200
300
200
Picture
link to website
link to website
Measured values
temperature, CO2
temperature, CO2
Application/type
Duct sensor
Configuration
Thermokon app, uConfig, BUS, jumper, DIP switches
Thermokon app, uConfig, BUS, jumper, DIP switches
Sensor
NDIR (non-dispersive, infrared)
NDIR (non-dispersive, infrared)
Output voltage
2x 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ
2x 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ
Output current
---
---
Output switching contact
---
---
Network technology
RS485 Modbus
RS485 Modbus
Data transmission
RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature
0 - +50
Accuracy temperature
±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig
±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig
Output signal temperature
scaling analogue output, 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C, optionally configurable
scaling analogue output, 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C, optionally configurable
Operating range humidity
max. 85% rH short term condensation
Measuring range humidity
---
---
Accuracy humidity
---
---
Measuring range CO2
0..2000, 0..5000, optionally configurable
0..2000, 0..5000, optionally configurable
Accuracy CO2
±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
Measuring VOC mixed gas
---
---
Power supply
15..35 V = SELV, 19..29 V ~ SELV
15..35 V = SELV, 19..29 V ~ SELV
Power consumption
max. 2,5 W (24 V =), 4,3 VA (24 V ~)
Material in touch with media
Pipe, Ø=19,5 mm, black, length 180 mm
Pipe, Ø=19,5 mm, black, length 180 mm
Installation length
180
180
mm
Display
---
---
Enclosure
USE-M, impact- and shock-resistant enclosure with quick-release cover, PC
Colour
pure white
pure white
Protection IP
IP65, according to EN 60529
Connection
removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm²
removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm²
Packaging
87 x 87 x 250
87 x 87 x 250
Delivery content
incl. mounting flange, incl. mounting set (screws and accessories)
Preview - Generation
CAD
PDF
3D
2D